Contents Of Carton; Tools Required; Assembly - Craftsman T100 Serie Manual De Instructiones

Contents of Carton

• Lawn Tractor (1)
• Ignition Key (2)
• Plastic Oil Drain Sleeve (1) †
• Oil Drain Hose (1) †
• Hood Scoop (1) †
NOTE: This Operator's Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model depicted may
differ from yours. Refer to Figure 2-1 to match your transmission style; Foot Control CVT (Continuously Variable Transmission) or CVT (Continuously Variable Transmission). or
Hydrostatic.
Foot Control CVT
NOTE: This Operator's Manual covers several models. Features may vary by model. Not all
features in this manual are applicable to all models and the model depicted may differ from
yours. Refer to Figure 1 to match your transmission style; Foot Control CVT (Continuously
Variable Transmission) or CVT (Continuously Variable Transmission).

Tools Required

• Adjustable Wrench or Socket Set
ASSEMBLY & SET-UP
• Steering Wheel (1) -- Cup Washer (1) & Hex Bolt (1) •
• Seat (1)
• Dash Shroud (1) †
• Deck Wash Nozzle (1) †
• Hose Coupler (1) †
CVT
Figure 1
Moving the Tractor Manually
Hydrostatic Models
Hydrostatic models are equipped with a hydrostatic relief valve when it is
necessary to move the tractor manually. Activating this valve forces the fluid in the
transmission to bypass its normal route, allowing the rear tires to "freewheel." To
engage the hydrostatic relief valve, proceed as follows:
9
Operator's Manual (1)
• Engine Operator's Manual (1)
• Fast Start Guide (1)†
• Parts/Warranty Document (1)
• Product Registration Card (1) †
Hydrostatic
† — If Equipped