BLACK&DECKER BD168F Manual De Instrucciones página 20

Engine Specifications
Dry weight (approximate)
Dimensions (LxWxH)
Type
Fuel
Displacement (cc)
Horsepower (*Gross HP)
(hp @ rpm)
Fuel tank capacity (gallons/liters)
Oil capacity
Air cleaner type
Fuel filter
Spark plug type
Spark plug gap
Fuel shut off solenoid
Lamp coil
Idle control
Electric starter
Max. recommended tilt angle
* Gross horsepower (HP). This horsepower rating represents the maximum output under
laboratory conditions at 3600 RPM in accordance with SAE (Society of Automotive Engineers)
J1995 and should be used for comparison purposes only. Actual engine output will be lower
and will vary depending on the application, speed and other variables including altitude and
temperature.
N003333
BD168F-H
38 lbs.
(17.38 kg)
For dimensions, see shop manual installation drawings
Air cooled, 4 cycle single cylinder, spark ignited
Regular, unleaded gasoline (minimum 86 octane)
163
*5.5 @3500
.95/3.6
.63 qt/.60 l
Foam element or paper
NGK: BP6ES, BPR6ES/AUTOLITE: 63/AC DELCO: R41XL,
R42XLS, R43FS, R43XL, R43XLS, R44XLS, R45XLS or equivalent
0.028-0.031" (0.70-0.80 mm)
20- ENG
BD168F-L
38 lbs. (17.38 kg)
196
*6.5 @ 3600
.95/3.6
.63 qt/.60 l
Equipped
Without
Without
Without
Without
< 25 or 30°