BLACK&DECKER BD168F Manual De Instrucciones página 5

WHAT CAN HAPPEN
• Touching exposed metal (muffler
and other engine parts) can result in
serious burns.
WHAT CAN HAPPEN
• The engine can start accidentally
if the flywheel is turned by hand or
moved by pulling on the pull starter.
• Moving parts such as the pulley,
flywheel, and belt can cause serious
injury if they come into contact with
you or your clothing.
• Attempting to operate engine
with damaged or missing parts or
attempting to repair engine with
protective shrouds removed can
expose you to moving parts and
can result in serious injury.
WARNING: RISK OF HOT SURFACES
WARNING: RISK FROM MOVING PARTS
HOW TO PREVENT IT
• Never touch any exposed
metal parts on engine during or
immediately after operation. The
engine will remain hot for several
minutes after operation.
• Do not reach around protective
shrouds or attempt maintenance
until engine has been allowed to
cool.
HOW TO PREVENT IT
• Always disconnect the spark plug
before performing maintenance.
• Never operate the engine with
guards or covers which are
damaged or removed.
• Keep your hair, clothing, and gloves
away from moving parts. Loose
clothes, jewelry, or long hair can be
caught in moving parts.
• Air vents may cover moving parts
and should be avoided as well.
• Any repairs required on this product
should be performed by a Black &
Decker factory service center or a
Black & Decker authorized service
center.
5 - ENG
N003333