Child Lock; Operating Instructions; Custom Program - Jennair JMC8127DD Manual Del Propietário

12-Hour CLOCK and
TIMER
Oven is equipped with a 12-hour clock
and a timer that can be set up to 99
minutes and 99 seconds. Clock does
not display AM or PM.
To set clock:
Stop
1. Touch STOP
Clear
CLEAR pad.
Clock 2. Touch CLOCK
pad.
• ENTER TIME
OF DAY scrolls
through display.
3. Enter desired time
by using digit
touch pads.
• TOUCH START
scrolls through
display.
Start
4. Touch START.
To set timer:
1. Touch STOP
Stop
Clear CLEAR pad.
2. Touch TIMER pad.
Timer
• ENTER TIME IN
MIN. AND SEC.
scrolls through
display.
3. Enter desired time
by using digit
touch pads.
• TOUCH START
scrolls through
display.
Start
4. Touch START.
• To cancel timer
at any time,
press STOP
CLEAR pad.
ADD 30 SEC.
A time-saving pad, this simplified
control lets you quickly set and start
microwave cooking without the need
to touch START.
NOTE: If you touch Add 30 Sec., it
will add 30 seconds up to 9 minutes
59 seconds.
Example: To set for 2 minutes.
Touch Add 30 Sec.
Add
30 Sec. 4 times. The oven
begins cooking and
display shows time
counting down.

CHILD LOCK

This safety feature prevents unwant-
ed oven operation. Once the child
lock is set, no cooking can take
place. The Child Lock feature is also
useful when cleaning the control
panel. Child Lock prevents accidental
programming when wiping the con-
trol panel.
If the CHILD LOCK is set and you
touch another cooking pad, the word
LOCKED shows in the display.
Cancel the child lock according to the
procedure below.
To set the child lock:
Stop
1. Touch STOP
Clear
CLEAR.
0 2. Touch and hold 0
pad until the word
LOCKED
appears in the
display and two
beeps are heard.
To cancel the child lock:
0 Touch and hold 0
pad until the word
LOCKED
disappears in the
display.
After the CHILD LOCK is turned off,
the oven will operate normally.
11

Operating Instructions

CUSTOM PROGRAM

CUSTOM PROGRAM lets you recall
one cooking instruction previously
placed in memory and begin cooking
immediately
Example: To cook for 2 minutes at
60% power.
Custom
Program
Power
Level
Start
To recall the custom program:
Custom
Program
Start
1. Touch CUSTOM
PROGRAM.
Display scrolls
the words
TOUCH START
OR ENTER NEW
TIME.
2. Enter cooking
time. Display
scrolls TOUCH
START OR
POWER.
3. Touch POWER
LEVEL. Display
scrolls ENTER
POWER LEVEL
1 TO 10.
4. Enter power level
6. Display scrolls
P60 TOUCH
START.
5. Touch START.
1. Touch CUSTOM
PROGRAM.
Display scrolls
the words
TOUCH START
OR ENTER NEW
TIME.
2. Touch START.