Transport And Storage; Safety Measures - BEHA Unitest CHB 4 Manual De Instrucciones

Transport and Storage

2.0 Transport and Storage
Please keep the original packaging for later transport, e.g.
for calibration. Any transport damage due to faulty packa-
ging will be excluded from warranty claims.
Instruments must be stored in dry and closed areas. In the
case of an instrument being transported in extreme tempe-
ratures, a recovery time of minimum 2 hours is required
prior to instrument operation.

3.0 Safety Measures

This product left our factory in perfect and safe condition.
To maintain this condition, the operator must strictly ob-
serve the safety references contained within this instruc-
tion manual.
The respective accident prevention regulations esta-
blished by the professional associations for electrical
systems and equipment must be strictly met at all ti-
mes.
In order to avoid electrical shock, the valid safety and
VDE regulations regarding excessive contact voltages
must receive utmost attention, when working with
voltages exceeding 120V (60V) DC or 50V (25V)rms
AC. The values in brackets are valid for limited ranges
(as for example medicine and agriculture).
Measurements in dangerous proximity of electrical
systems are only to be carried out in compliance with
the instructions of a responsible electronics technici-
an, and never alone
Measurements are only allowed on conductors with
undamaged insulation. The conductor insulation
must comply with the requirements for basic insula-
tion with reference to nominal voltage and measure-
ment circuit class.
18