Specifications - Arbortech AS170 Manual De Instrucciones

NOTE: Failure to use the dust extraction funnel
E
when cutting masonry materials will cause
N
excessive wear of electrical components. Damage
caused by dust will lead to premature failure of the
G
motor, which will affect the warranty.
CAUTION: Verify that the vacuum machine being
used has a filter system appropriate for the
material being cut. Incorrect filtration can result in
inadequate dust control and also possible damage
to the vacuum machine.
Dust extraction funnel

9. SPECIFICATIONS

ITEM
Cutting depth/width
Weight, with cutting
blades
Dimensions without
blades
No load speed n
ENGLISH 11
SPECIFICATION
120mm (4
3/4")/6.5mm (1/4"),
depending on blade
4.3kg (9.5lb)
450 mm (17 7/8") L
75 mm (3") W
240 mm (9 1/2") H
5100 rpm
0
ITEM
Electrical rating,
nominal
Dust extraction vacuum
hose interface
Belt tension
Blade mount bolt
torque
TECHNICAL DATA
Vibration
7.7 m/s
Noise 92db max at 1.0m
The declared vibration emission level is based
no measurements representing the main
applications of the tool. However if the tool is
used for different applications, with different
accessories or poorly maintained, the vibration
emission may differ. This may significantly
increase the exposure level over the total
working period. An estimation of the level of
exposure to vibration should also take into
account the times when the tool is switched off or
when it is running but not actually doing the job.
This may significantly reduce the exposure level
over the total working period. Identify additional
safety measures to protect the operator from
the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm,
organisation of work patterns.
SPECIFICATION
230-240 VAC, 50Hz,
1250W (Australia)
230 VAC, 50 Hz
1250W (Europe)
110 - 120 VAC,
50-60 Hz 13A
(USA/CANADA/UK
Industrial)
Suits vacuum hose
with inner diameter
of 25mm (1") , 32mm
(1 1/4"), 37mm (1
3/8") or outer hose
diameter 32mm
1 mm (1/16")
maximum mid-span
deflection with
25 N (2.5 kg) (5lb)
deflection force
18 Nm (1.8 kg-m),
(13.2ft-lb),
2