Prior To Use; Unpacking The Device - ECG CDR 800 Manual De Instrucciones

Tabla de contenido

Publicidad

The power cord should be led so as to avoid stepping on the cord or its excessive straining or pinching. Pay
special attention to places where then cord exits from the appliance and close to the plug. If the device is
not used for long periods, unplug the power cord. Unplug the power supply also during a thunderstorm
to prevent damage by lightning.
The electrical outlet has to be constantly accessible.
Do not overload electrical outlets by plugging in too many appliances.
Protect the device against infiltration of liquids or foreign objects and do not insert any object into the
ventilation openings, with potentially hazardous contact with voltage inside the device.
Do not open the device box. There are no elements inside that can be configured by the user. Have
a qualified service technician perform repairs on the device.
Do not expose batteries to excessive temperatures, e.g. direct sunlight, fire etc.
Replace batteries only with batteries of the same type and with correct polarity. Otherwise there is a risk
the system may explode.
In the following cases, unplug the device and contact a qualified service:
The power cord was damaged
The device was infiltrated by a foreign object or liquid, or it was exposed to rain or water.
The appliance does not operate normally in accordance with the manual. Set only the elements
described in the operating manual.
The device has significant functionality changes, indicating a need for service.
Do not expose the device to heat sources such as radiators, heating or other heat-producing appliances
such as amplifiers.
Changes or modifications not expressly approved by the responsible authority can lead to loss of
authorization to use the device.
Excessive sound pressure from earphones can cause hearing damage.
DESCRIPTION
Appliance
Speaker
1.
CD tray door
2.
3.
PROGRAM button
FOLDER UP button
4.
MODE button
5.
SKIP- button
6.
7.
SKIP+ button
CD/USB button
8.
STOP button
9.
10. PLAY/PAUSE button
11. Tuning control

PRIOR TO USE

Unpacking the device

Remove carefully the device from the box and dispose of all the packaging material. Make sure that the
package contains all the parts.
If any part is missing, contact your vendor. We recommend to keep the original box and packaging materials
for possible future use. The original packaging is the best way to protect the appliance during transport
from damage. In case of disposal of packaging materials, follow local regulations on environmental
protection.
Remove from the device all stabilizing and descriptive labels. Do not remove warning labels or device
type label.
12. Handle
13. Functions selector (FUNCTION)
14. Volume control
15. LCD display
16. Opening the CD compartment door
17. AUX/IN jack
18. AC power supply plug
19. FM antenna
20. USB connector
21. Battery compartment
GB
35

Publicidad

Tabla de contenido
loading

Tabla de contenido