ECG MTD 2080 VGSS Manual De Instrucciones página 74

ASSEMBLY OF THE MICROWAVE OVEN
1 Safety locking system (turns off the power supply if the door is opened
during cooking)
2 Viewing window in the oven door
3 Turntable axis
4 Assembled turning ring
5 Door opening button
6 Control panel
7 Waveguide
8 Glass tray
9 Grill
0 metal grate (Only for grill function)
GB
INSTALLATION OF THE TURNTABLE TRAY
Hub (bottom side)
Turntable
Support axis
74
DISPLAY
• Shows cooking time, power level, program, and hours.
POWER LEVEL (POWER LEVEL)
• Number of pressing of this button will determine the microwave power level.
GRILL (GRILL)
• Press to set grilling program.
WEIGHT DEFROST (WEIGHT DEFROST)
• Press to set defrosting according to weight.
COMBI. (COMBINATION WITH GRILL)
• Press to set combination of microwave cooking and grilling.
CLOCK/PRESET (CLOCK/PRESET)
• Press to set time.
• Used to set a program preset.
WEIGHT ADJUST (WEIGHT ADJUST)
• Press to set the weight of the food or the number of portions.
PAUSE/CANCEL (PAUSE/CANCEL)
• Press to cancel a setting or reset the oven before setting a selected program.
• Press once to pause the selected program, press again to cancel the selected program.
• Also used to set the child safety lock.
START/QUICK START (START/QUICK START)
• Press to start the cooking program.
• Press repeatedly to set the quick start function.
MENU/TIME (MENU/TIME)
• Turn to set the required cooking time.
• Turn counterclockwise to select a program in the auto cooking mode.
1. Never place the glass tray upside down The turntable must always rotate freely.
2. Do not use the oven without the turning ring and the glass tray.
3. All foods and dishes with food must be always placed on the glass tray.
4. If the glass tray breaks or the turning ring is damaged, contact your nearest
authorized service center.
Assembled support