Publicidad
Idiomas disponibles
Idiomas disponibles
B>
Heat/Cool Start Dealy
Turning roller to select Heat/Cool Start Dealy setting then press OK.
Turning roller to set Heat or Cool or Heat/Cool starting delay or both not. Starting delay will
allow 5 minutes system starting delay.
Press OK to confirm and back to Future feature setting display.
Display Temperature Adjustment. The adjustment range is 2.5'C low to 2.5'C
C>
high. The thermostat was accurately calibrated at the factory but you have option to
change the display room temperature to match your previous thermostat.
Turning roller to select Display Temperature Adjustment setting then press OK.
Turning roller to adjust Display Temperature. Display temperature at top right. And
adjustment in the middle.
Press OK to confirm and back to Future feature setting display.
4. Battery low alarm, when battery is low, LOWBTY displays and flashes at top. You need
to replace the battery.
5. Receiver: Connected the wire as the wiring diagram as below.
Press MANUAL to shift receiver controlled by wireless transmitter (LED light up to
GREEN) or manual controlled(LED light up to RED)
When in manual control mode, press ON/OFF button to turn ON or OFF system.
Publicidad
