Publicidad
Idiomas disponibles
Idiomas disponibles
6．Wiring
A Pre-Installed Wire installed between wire terminal "COM" and "L". If Aplliance and
Thermostat power sources are the same. User only need to connect Live wire to "COM"
terminal.
If the Appliance and Thermostat power sources are NOT the same. User need to remove
this wire first. And then install the Aplliance Live wire to "COM" terminal and Thermostat
Live wire to "L" terminal.
7. Specifications
A. Transmitter: Measurement Temperature Range: 0'C to 35'C
B. Receiver 230V 50Hz 16A Resistive Load
RF Frequency: 433MHz
Power: 230VAC Operated.
Setting Temperature Range: 5'C to 30'C
RF Frequency: 433MHz
25 meters range
Power: 2 x AA Alkaline Battery Operated.
Publicidad
