JBL On Stage Micro III Manual Del Usuario página 6

5. Connect a USB Type Mini-B cable (not included) to the
Micro III's USB port and to a USB port on the computer on which your iTunes
is located.
6. If you are going to use your
source, plug one end of a 3.5mm stereo cable (not included) into the Audio
In connector, and plug the other end into the audio source's audio out or
headphone out connector.
6
0218CSK - JBL On Stage Micro III OM EN v3.indd 6
JBL On Stage
USB Type Mini-B
JBL On Stage Micro III with another audio
3.5mm
IMpOrtant: If you play audio through a docked ipod/iphone
and an audio source connected to the audio In connection at the
same time, you will hear both of their outputs mixed through the
Jbl On stage Micro III. to hear only one source you will need to
manually turn off the source you do not want to hear.
7. Insert the included AC outlet adapter all the way into the power supply
(if there is more than one adapter, use the correct one for your region).
Then connect the power supply into the JBL On Stage Micro III's 6V DC In
connector and plug it into an AC wall outlet.
1. 2.
09/07/10 12:30:33