Parts And Controls; Safety System; Initial Use - Beurer HK 26 Manual De Instrucciones

5� Parts and Controls
1. Controller
2. Heating pad
3. Mains plug
4. Cord
5. Control Connector
6. Power button for
ON/OFF and
temperature settings
7. Heat indicator lights
8. Heating Pad
Connector

Safety System

NOTICE
The heating pad is equipped with a safety system. The "high" indicator light will blink red when an error
occurs. If this happens, unplug the heating pad from the electrical outlet. Check the physical condition of the
cord, the wall outlet and the connection between the Control Connector and the Heating Pad Connector. If
blinking persists after you confirm a proper connection, contact Customer Service for assistance.
6� Initial Use
Attach the Heating pad Connector to the Control Connector. Push both parts together securely to ensure
a tight fit.
Control Connector
Heating Pad Connector
NOTICE
The Control Connector must be connected to the Heating pad Connector before plugging the unit into an
electrical outlet. After connecting the Heating pad Connector to the Control Connector, plug the unit into a
120V AC electrical outlet.
8
1
2
5
6
7
6
4
3