Storage; Disposal; Troubleshooting Guide - Beurer HK 26 Manual De Instrucciones

To prolong the life of your heating pad, proper care and cleaning is essential. Follow these washing instructions
to preserve the softness of the fabric and protect the electrical components:
• Set controller to OFF.
• Disconnect power cord. DO NOT pull by the cord.
• Disconnect Control Connector from pad.
• To machine wash, set the washing machine to delicate or wool cycle and warm water setting.
Always wash the heating pad together with other items. Use a mild laundry detergent according to
the manufacturer's instructions.
• Alternatively you can wash your heating pad by hand in lukewarm water.
• Let air dry or tumble dry the pad on medium heat for 5 minutes. Reshape the still damp heating pad
to the original size immediately after washing.
• Frequent washing of the heating pad is not recommended and should only be machine washed a
maximum of 10 times during its life. Let the heating pad dry flat on a drying rack. To prevent product
damage, do not use pegs or similar items to attach the heating pad to the drying rack.
• DO NOT plug back in pad until the pad and plug are completely dry.
• Use a dry, lint-free cloth for controller cleaning and care.
• Prior to cleaning, always disconnect the Power Cord from the heating pad; otherwise there is a risk
of electric shock and/or product damage.
• Reconnect the heating pad to the Power Cord only after the heating pad and the connector socket
are completely dry.
9� Storage
CAUTION
If you do not plan to use the heating pad for a long period of time, store it in the original packaging in a cool,
dry place.
NOTICE
Allow the heating pad to cool down before storing. To avoid making sharp bends in the heating pad, do not
place any objects on top of it while storing.
10� Disposal
Observe the local regulations for material disposal. Dispose of the device in accordance with local regulations.
If you have any questions, please contact the local authorities responsible for waste disposal.
11� Troubleshooting Guide
Problem
The heating pad won't switch on,
the LEDs remain off.
The "high" LED flashes red.
If the problem persists, please contact Customer Service for assistance.
Solution
The Control Connector or Mains Plug is not properly connected to
the Heating Pad Connector or power outlet. Check if the connectors
are properly connected and press the Power Button to turn on the
device.
The heating pad was shut off by the safety system. Unplug the
device, check if the Control connector is plugged in properly. Plug in
the power cord and press the Power Button to turn on the device.
8