Blade Care; Technical Specifications - ECG ZS 08 Manual De Instrucciones

• Do not use solvents or cleaning products with abrasives to clean the clipper 4 and the attachments
(7 and 8).

Blade care

Lubricate the blades regularly qs.
• Turn the clipper off by pushing the switch 3 to position "0" and if you are using it with the power cord,
disconnect the power adapter 0 from the wall outlet and then from the clipper.
• Remove the attachment (7 or 8).
• Press the blade edges 5 in the same time from both sides away from the clipper 4 to remove the clipping
unit.
• Use brush qa to clean the inside part of the clipper and the clipping part from the hair remnants.
• Apply one or two drops of oil qs on the tooth blades and the rear support part of the upper blades 5.
• Insert the tab on the bottom part of the clipping unit to the groove on the body of the clipper 4 and push
from the outside on the stationary blades 6 so that the clipping unit is locked in its place. Proper lock is
signalled by a click.
• Turn the clipper on and make sure that the blades are moving smoothly.
• Turn the clipper off and using dry cloth from antipiling material remove excess lubricant from the
blades (5, 6).
Storing
Before storing the hair clipper clean it and lubricate the blades (5, 6) with oil qs.
Store the clipper in a dry and cool place out of the reach of children.

TECHNICAL SPECIFICATIONS

Power adapter
Input adapter voltage:
Input voltage:
Hair clipper
Ni-Mh battery
Voltage
Power consumption
NOTE: The following situations void the warranty:
Incorrect or inappropriate handling of the device, failure to observe safety measures applicable to the device, the use of force,
alterations or repairs made by a party other than authorized service center.
Parts subject to normal wear and tear (with batteries, it is especially the loss of capacity, battery life is at least 6 months from
the date of sale) are not covered under warranty.
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European countries with an
implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specifi ed location for recycling electric and electronic equipment. Prevent negative
impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the product.
NiMH battery used in this device must not be disposed of in regular household waste. The battery must be
disposed of properly. For more information, please contact the distributors of batteries or collection points for
waste disposal.
This product complies with EU directive requirements on electromagnetic compatibility and electrical safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
220–240 V ~ 50/60Hz
3 V DC, 0,3 A
300 mAh
2,4–3 V DC
2.5 W
GB
Ni-Mh
31