Operation Of Qanto; Electrical System; Control Element - Ninka Qanto Instrucciones De Uso

EN

6. Operation of Qanto

6.1 Electrical system

Before connecting the electrical drives to the in-house power mains,
compare the voltage of the power mains with the input voltage specified on
the type plate. The mains voltage and permissible input voltage must be
identical. If not, Qanto must not be connected. Please contact your spe-
cialist dealer.

6.2 Control element

During the installation and use of Qanto, sufficient clearance for the move-
ment of the lifting system must be observed so that no risks arise for users
and other people in the vicinity.
The on-period must not exceed 6 minutes an hour or a maximum of 2
minutes in continuous operation. This can lead to an overheating of the
motor, brake and spindle nut. When the on-period is exceeded, the service
life of the lifting column can be considerably reduced.
+
PRESSING and HOLDING the button
moves the drive up.
EN - 9
Qanto_Id_A5_0000.50 65060_EN 26042018