Spare Parts; Ordering Spare Parts; Recycling - Nederman Rail System 920 Touchless Manual De Usuario

13 Check the operation of the balancer. Check that
the telescopic arm lifts up properly. If necessary,
adjust the lifting power of the balancer. See
tion 4.8 Adjusting the lifting power of the balan-
cer. Begin by trying in the top or zero position first.
If the telescopic unit falls down, the lifting power
must be increased. The telescopic unit must be
balanced in all positions with the pin-jointed arm
in a vertical position.
14 Check the fixing of the rail brackets.
7 Spare Parts
CAUTION! Risk of equipment damage
Use only Nederman original spare parts and ac-
cessories.
Contact your nearest authorized distributor or
Nederman for advice on technical service or
if you require help with spare parts. See also
www.nederman.com.
7.1 Ordering spare parts
When ordering spare parts always state the following:
• The part number and control number (see the
product identification plate).
• Detail number and name of the spare part (see
www.nederman.com).
• Quantity of the parts required.
8 Recycling
The product has been designed for component mater-
ials to be recycled. Its different material types must be
handled according to relevant local regulations. Con-
tact the distributor or Nederman if uncertainties arise
when scrapping the product at the end of its service
life.
Rail System 920 Touchless
Sec-
EN
13