1) GENERAL
The original instruction handbook was compiled in
English. The other languages are based upon the
original version.
Applicable standards
• 2006/42/EC: Machinery Directive
• EN ISO 12100:2010
Safety of machinery – general principles for
design – risk assessment and risk reduction
• EN ISO 4414:2010
Pneumatic fluid power – General rules & safety
requirements for systems and their safety
Copyright
All rights reserved. This manual may not be copied
either in part or as a whole nor reproduced in an elec-
tronic form without the previous written permission of
the manufacturer.
Guarantee
The manufacturer grants 24 months guarantee from
the date of delivery of the dispenser. Wearing parts are
excluded from the guarantee. Modifications to the
device as well as repair and service work may only be
carried out by the manufacturer or his service partner,
otherwise the warranty and liability rights are rendered
invalid.
Typeplate and CE mark
EN
Additional system documentation
You can find additional information on our website at
www.sulzer.com.
2) SAFETY REGULATIONS
Ensure that the instruction handbook is
always easily accessible for users.
We reserve the right to make changes as the
result of technical modifications.
Read this instruction handbook through care-
fully! Correct function and operational safety
can only be guaranteed when the users are
familiar with and comply with all safety regu-
lations in this instruction handbook.
Symbols in the instruction handbook
Symbol
Meaning
INFORMATION
Information on assembly, operation or
maintenance.
Possibly dangerous situation. If this danger
WARNING
is not avoided, death or very serious, irre-
versible injuries can result.
Possibly dangerous situation. If this danger
CAUTION
is not avoided, slight or minor irreversible
injuries can result.
Situation that could cause damage to equip-
NOTICE
ment.
Generally dangerous situation.
Risk of explosion
Dangers/hazards that may result from open
fire
2 of 10
Instruction handbook DP2X
Version 1.2 · 8.10.19