Integra MILTEX Instrucciones De Uso página 5

2. Adjusting IPD
2.0 With the Set and Forget™ feature, the only adjustment that is usually needed is to set
the IPD (Interpupillary Distance). While focusing on an object, pull up on the Interpupillary
Adjustment Knob and rotate, moving the optics apart and together. Look at the outside
rings of the field of view when adjusting the IPD.
2.1 Focus on an object with the optics far apart.
2.2 Bring the optics together until a single circle is observed. When a single circle is
observed the IPD is set.
2.1
2.0
Before IPD is adjusted
2.2
After IPD is adjusted
www.miltex.com 5