Technical Specifications - Berner BPT-RA Instrucciones De Manejo

Tool Drive Speed
Holder M max
Nm min
Loop
41
System
IG = Innengewinde/female thread
Sound level according to DIN 45635-20. Vibrations according to ISO 8662
This pneumatic ratchet is a hand-guided tool for tightening/loosening of nuts and screw bolts.
-
Always wear eye protection and protective clothing / equipment to avoid injuries
-
Pay attention, that the operation pressure never exceeds over 6,3 bar
-
Only use correct, unworn impact - proof sockets
-
Do not use pneumatic tools in explosive atmosphere
-
For sufficient tool performance make sure that the correct hose - size and fittings are used when
connecting the tool
-
Disconnect the tool from the air-supply before changing accessories or when not in use
-
Never carry the tool by the hose
-
Do not touch moving parts
-
Keep tool away from your body while working
-
Always wear ear-protection
-
check air hose connections
-
Only disconnect the machine without pressure of the air, to avoid infractions by uncontrollable
movement of the air hose
ONLY TO USE THE MACHINE FOR THE DESCRIBED APPLICATION. BERNER DEBARS LIABILITY
FOR CONSEQUENCES FOR ALIENATED APPLICATIONS OR CONTRAVENTION AGAINST THE
5

1. Technical Specifications

Weight Inner Hose
Diameter
1 kg mm
-
850 0,5 10
2. Application-Function-Maintenance
Protective-couplings upon request
3. Application range/Safety rules
SAFETY RULES.
Max. Air consumption
Pressure
bar l/min
6,3 113
Air Noise Vibration
Inlet LpA
Zoll dB (A) m/s
1/4" IG 85 5,73
Copyright BERNER
2