Sandri Garden SG 1225/25 CS Manual De Instrucciones página 51

PEtROL CHAiN SAW FOR tREE SERViCE USER MANUAL
A8 – The operator is accountable for
any accidents or dangers occurred to
other people or their belongings.
A9 – Only use the CHAiN SAW to
cut wood.
Do not use the chain saw for other
purposes.
A10 – Wear safety clothing and
equipment suitable for CHAiN SAW
operation.
When using the chain saw, wear snug
fitting clothes; avoid loose items of
clothing.
Use a heavy duty overall and suitable
cut proof safety equipment on feet,
legs, hands and forearms.
Do not wear any objects which may
get caught inside the moving parts of
the chain saw.
A11 - Wear approved safety goggles
or visors.
A11.1 - Wear approved safety ear
muffs.
WARNiNG !! the chain saw can
cause damages to ears and eyes.
A11.2 - Wear approved safety helmet.
A helmet fitted with a strap under the
throat is recommended.
A12 – Wear approved safety shoes
with non slip soles, suitable for climb-
ing trees.
A13 - Wear approved safety gloves
(cut proof).
A14 – Anyone using the CHAiN SAW
must be in good psychological and
physical conditions. DO NOt USE
the petrol chain saw if you feel tired,
unwell or are taking medications
which cause drowsiness, alcohol
and drugs.
A15 - WARNiNG! Exhaust gases
are poisonous and asphyxiating. If
inhaled, they may even be fatal. Do
not start the engine in a room with
poor or no ventilation.
A16 – The prolonged use of the chain
saw may cause blood circulation
problems to the hands (white finger
disease) caused by vibrations.
The following factors may affect the
occurrence of such conditions:
- The operator's proneness to poor
blood circulation to the hands.
- Using the chain saw at low tem-
peratures (the use of warm gloves is
recommended).
- Long, continuous use of the petrol
chain saw (taking breaks when using
the chain saw is recommended).
- If you are affected by pins and nee-
dles and by numbness, seek medical
advice.
A17 - WARNiNG! Petrol and its va-
pours are extremely flammable.
DANGER OF FiRE AND OF SERiOUS
OR EVEN FAtAL BURNS.
A17.1 – Stop the engine before
refuelling.
A17.2 – Do not smoke when refuel-
ling.
A17.3 – Dry any fuel spillage. Start
the engine away from the refuelling
area.
A17.4 – Make sure the fuel tank cap
is tightly closed.
Pay attention to fuel leaks. When
operating the chain saw, periodi-
cally check that the cap has not
come loose.
A18 – During operation, tightly hold
GB
51