Safety Precautions - OTC 4292 Manual Del Usuario

The OTC 4292 Digital Hydraulic Readout, when connected to the OTC 4291 flow block,
accurately measures flow, pressure and temperature.
This easy to use diagnostic unit can pinpoint hydraulic system faults, reduce downtime and
help in preventative maintenance.
The readout has two flow inputs and can be connected to one flow block by a 20 ft. long cable
and micro-bore hose assembly to the left hand side of the readout. A second flow block can
be connected via a 6-1/2 ft. long cable to the front of the readout. Flow inputs can be easily
calibrated by the operator. The readout is scaled in lpm, gpm, US gpm, selectable by push
button.
CAUTION: To prevent injury and / or property damage,
l Study, understand, and follow all safety precautions and operating instructions before
using this equipment. If the operator cannot read instructions, operating instructions
and safety precautions must be read and discussed in the operator's native language.
l No alteration shall be made to this product.
l Inspect the condition of the equipment before each use; do not use if damaged,
altered, or in poor condition.
l Ensure load valve is fully open prior to testing.
l Wear eye protection that meets the standards of ANSI Z87.1 and OSHA.
Introduction

Safety Precautions

1