Safety Instructions - Ega Master 79621 Manual De Instrucciones

Ventilador axial
Ocultar thumbs Ver también para 79621:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

. Flammable and explosible material has to be removed from the work area
before work is started. Amongst others, this relates to dust deposits, cardboard,
packing material, textile, wood and wooden splints, but also flammable fluids and
gas.
SAFETY INSTRUCTIONS FOR PREVENTION OF HAZARDS CAUSED BY COMPRESSED AIR
WARNING – Compressed air can cause severe injury. Before working on the
tools (e.g. installation, changing accessories or machine tools, prior to a long
standstill, maintenance, etc.) depressurize pneumatic equipment (close valve and
depressurize pneumatic hose).
CAUTION – Risk of injury by whipping pneumatic hose.
Check pneumatic hoses, connection components and fittings regularly for any
damages and proper fixture.
When connecting / disconnecting the machine to / from the pneumatic supply, please pay careful
attention not to actuate the start lever while doing so. Never remove a pressurized pneumatic hose.
Always switch the power supply off first and then let the machine run out. The maximum
operating pressure (flow pressure) according to the technical specification must not be exceeded.
A pressure regulator should be installed, which regulates the pressure before it reaches the
machine. Never direct a pneumatic hose at yourself or anyone else. Never clean your clothes with
compressed air. Direct cold air away from your hands. Do not pull or carry the machine by the
pneumatic hose. When using claw couplings make sure that they are fitted with a suitable lock
mechanism (e. g. lock pin) and a safety chain.
SAFETY INSTRUCTIONS FOR PREVENTION OF OPERATING HAZARDS
Do not use the machine if you have taken any medication or drugs, after drinking alcohol or with
any other constraints on your vision, reaction or judgment.
Additionally consider the following:

Safety instructions

The pneumatic axial fan may only be commissioned, operated and serviced in compliance with
the following instructions:
. Operating instructions
. Warning and information signs on the fan
. Any other operating and installation instructions pertaining to the construction
. Terms and requirements relevant to the construction
. Valid national and regional regulations, especially regarding explosion protection, health &
safety and accident prevention.
39

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

79622

Tabla de contenido