Display Elements Therm 300 - BEHA UNITEST Therm 200 Manual De Instrucciones

Dislplay Elements

4.2.2 Display Elements Therm 300

4a) Display field for
• additional temperature display of T1
• pre-set limit value (MAX value) with alarm function
T1 or T2
• memory address number
4b) APO = Auto Power Off is activated
4c) display field for
• additional temperature display of T2
• pre-set limit value (Min value) with alarm function
for T1 or T2
• sampling rate for RECORD function
4d) HOLD = HOLD function is activated
4e) Unit °C or °F and S for activated SHIFT function
4f) Main display
4g) REC = data logger is activated
M = saved data is available
4h) display for type of measurement
4i) ALARM for activated LIMIT
SEND for activated data transfer
REL for relative value measurement
4i
4h
The symbols > and < preceding the displayed measu-
rement values indicate an exceeding > or falling below
< of the display or measurement range.
If - - - - is displayed, the thermocouple is not connec-
ted to the measurement input.
40
= display for discharged battery
for activated backlight
4a
4g
4b
4f
4c
4d
4e