Adjusting The Halogen Lamp Beam; Shutdown - Dräger RH 600 Instrucciones De Uso

Operation

Adjusting the halogen lamp beam

Shutdown

Adjusting the halogen lamp beam
for precisely aimed lighting
1 Press the tabs towards the front panel
to adjust the light cone towards the rear.
Pull the tabs
to move the light cone forwards.
Shutdown
First:
Fully press in the power switch = OFF.
Then:
Disconnect the power plug.
These two steps must not be performed in reverse
order, because otherwise the power failure alarm is
activated.
Wait approx. 30 minutes for the apparatus to cool down
before servicing/cleaning.
44
3 1 3
1