Filling With Water; Dry Ironing; Steam Ironing - Oster 5002 Manual De Instrucciones

• Turn off the Iron and disconnect the plug from the electrical wall outlet before filling
the Iron with water.
• Turn the Steam Select Dial to the off position
• Set the Iron in the position indicated below (figure 2) and fill it with water, no higher
than the Max fill level shown on the See Through Water Window.
• Insert the plug in the electrical wall socket.
• Make sure that the Steam Select Dial is in the closed position
• Select the desired temperature in the Temperature Control Dial.
• After the Indicator Light goes off, you may start to iron.
• Steam ironing is only possible at high temperatures ("
on the Temperature Control Dial.
• Be sure that there is enough water in the Reservoir.
• Set the iron in an upright position.
• Plug in the steam Iron into the wall electrical outlet.
• Select the temperature by setting the Temperature Control Dial in the desired position
within the range of temperatures included in the steam area of the dial.

Filling With Water

(figure 2)

Dry Ironing

Steam Ironing

5
.
.
", " "), as indicated