Operation/Programming; General Information; Programming The Appliance - FLORABEST FBC 7 A1 Instrucciones De Uso

Operation/Programming

In this chapter you will receive important information about the
operation and programming of the appliance.

General information

■ By pressing the button M
mode.You can either carry out all settings in succession or,
by repeatedly pressing the button M
following setting options:
― System time (actual time/weekday)
― Water fl ow in %
― Time for the next watering
― Duration of the watering
― Watering interval
― Standby (Programming mode terminated and watering
programme active).
■ After about 1 minute without input the appliance returns to
standby mode.All values already programmed are retained.
■ By pressing the button ON/OFF
be terminated at any time. All values already programmed are
retained.

Programming the appliance

System time (
♦ Press the button M
symbol blink.
♦ Using the rotary knob
the button
blink.
FBC 7 A1
you activate the programming
3
)
A
3 once. The hour indicator and the clock
2 enter in the required value and press
4 . The minute indicator and the clock symbol
, switch between the
3
5 the programming mode can
GB
MT
61