Akiyama ACORDE Manual De Usuario página 5

12 .
NEXT FOLDER
Press this button to skip to the next folder on your connected device and play the first available MP3 in
that folder
13 .
PLAY MODE
Press this button to select how ACORDE will play the tracks:
Repeat All , the entire collection of tracks will repeat.
current folder will repeat. Random ,All the tracks in your connecte device will play in random order.
14 .
SPLIT TRACK
When recording to your connected device, you can press this button to create a new track. The new track
number will be one higher than the previous one and saved to the same folder on your device.
15 .
ARM ELEVATION SYSTEM
Raises and lowers the tone arm.
PLAYING MP3s FROM A DEVICE
1. Connect a USB device or SD CARD with MP3 files to the USB slot or SD CARD slot respectively. The
LCD will show "USB READ" or CARD READ" when it is properly connected, and USB or SD CARD
will be shown in the upper right corner.
2. The LCD will display the total number of folders on the device
(on the left) and the total number of available tracks (on the right).
Use the TRACK buttons to move throught the tracks.
You can also press NEXT FOLDER buttonto jump to first track of
the next folder. The current track will begin playing.
3. The LCD will show the PLAY icon, the track number an the time
elapsed.
- To skip to another track, use the TRACK
Display will briefly show the number of the folder and the new
track.
- To pause playback, press the PLAY/PAUSE button.
- To stop playback, press the STOP button
- To switch how ACORDE plays the tracks, press the PLAY
MODE button:
Repeat , the current track will repeat.
RepeatAll , the entire collection of tracks will repeat.
Repeat Folder , the collection of tracks in the current folder will
repeat.
Random , All the tracks in your connecte device will play in
4. To eject the device, first stop the current track by pressing STOP
button. If your device is a USB drive, gently pull it from the slot. If
your device is an SD CARD, push it into the slot until it clicks,
then gently remove it.
Repeat , the current track will repeat.
Repeat Folder , the collection of tracks in the
buttons. The
RECORDING MP3s TO A DEVICE
1. Connect a USB device or SD CARD with or with out MP3 files to the USB slot or SD CARD slot
respectively. The LCD will show "USB READ" or CARD READ" when it is properly connected, and
USB or SD CARD will be shown in the upper right corner.
2. If the device already contains Mp3s, the display will shows the
total number of folders on the device (on the left) and the total
number of available tracks (on the right)
3. Cue up the music you want to record from a record on the
PLATTER.
4. Press RECORD. The display will show "LOADING". When
the PLAY/PAUSE icon and time display are flashing on the LCD,
ACORD is ready to record.
5. To begin recording. press PLAY/PAUSE. Items on the LCD will
flash briefly and "REC" will be shown to indicate ACORD is
recording. The display will show the track number and the time
elapsed.
- To start a new track immediately without stopping the recording
process, press SPLIT TRACK. The currently recording track will
stop and a new recording will begin.
Note: Tracks that are split will be given sequential track numbers
and stored in the same folder.
- To stop recording, press the STOP button. Tha LCD display will
show "USB READ or "CARD READ" to show it is rescanning the
connected device for your new tracks.
6. After stopping the recording, you may play new tracks or eject
your device. To eject the device, first stop the current track by
pressing the STOP button. If your device ia a USB drive, gently
pull it from the slot. If your device is an SD card, push it into the
slot until it clicks, then gently remove it.
4