Mains Connection; Amplifier Connection - Akiyama ACORDE Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

A
MAINTENANCE
A-
Cleaning the stylus:Adirty stylus will cause noise and poor sound quality. Use a stylus cleaning kit and brush off the dirt in the direction of the arrow.
Do not brush in the opposite direction or from side to side, since this can damage the stylus.
Replacing the stylus: When the sound quality drops, replace the stylus with a new one. Remove the old stylus by pulling it downwards gently, and push the new stylus into place as shown.
B-
Maintenance of external surfaces
:
-
Use a polishing cloth or dry cloth to wipe off dust and dirt.
When the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times
-
-
Never use thinners, benzene, insecticide sprays and oth

MAINS CONNECTION

Ensure that the mains voltage of your home corresponds to the operating voltage of the unit. Your
Ensure that the mains voltage of your home corresponds to the operating voltage of the unit. Your
unit is ready to be connected to a correct voltage of your location.
unit is ready to be connected to a correct voltage of your location.
5
MANTENANCE
B
Connect audio plugs to magnetic record player input on your amplifier:
Connect audio plugs to magnetic record player input on your amplifier:
Red plug into R/H channel input.
Red plug into R/H channel input.
White plug into L/H channel input.
White plug into L/H channel input.
- Place the record of your choice on the turntable. If it is a 45 rpm, do not forget to place the
- Place the record of your choice on the turntable. If it is a 45 rpm, do not forget to place the
adaptor on the record spindle.
adaptor on the record spindle.
- Choose the desired playing speed:
- Choose the desired playing speed:
33 rpm -> button unlocked
33 rpm -> button unlocked
45 rpm-> button locked.
45 rpm-> button locked.
-
-
Release the pick-up arm clip.
Release the pick-up arm clip.
-
-
Place the cartridge vertically over the first track of the record the turntable starts turning.
Place the cartridge vertically over the first track of the record the turntable starts turning.
-
-
When the record is over, the pick-up arm returns to its rest , the turntable stops turning
When the record is over, the pick-up arm returns to its rest , the turntable stops turning
Push the lift button close latch to secure pick-up arm
Push the lift button close latch to secure pick-up arm

AMPLIFIER CONNECTION

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido