Skil PM4910-00 Manual Del Propietário página 25

Fig. 17
Stabilizer 1
Loosen
Stabilizer 2
Installing the Blade
WARNING
wrapping the cutting edges with rags or other
materials when performing any maintenance
on the mower blade. Always remove the
battery pack when servicing or transporting the
mower.
NOTICE: To re-install or replace the blade, be
sure to replace the parts exactly in the order in
which they were removed (Fig. 18).
1. Mount the inner flange to the fan (Fig. 19).
2. Mount the fan and the inner flange onto the
motor shaft with the fan blade towards the
deck (Fig. 20).
3. While wearing protective gloves, position the blade on the inner flange with the surface
marked "THIS SIDE FACING GRASS" facing toward the outside (Fig. 21).
Fig. 20
4. Align the outer flange with the shaft and assemble it in place.
5. Mount the bolt into the shaft and turn it clockwise by hand to pre-tighten it.
Always protect your hands
by wearing heavy gloves or
Fan blade
Inner Flange
Fig. 18
Outer Flange
Inner Flange
Fan
Fig. 19
Fig. 21
Bolt
Blade
25