Battery Information - Apex COM-TENS III Manual De Instrucciones

6. Adjusting Channel Intensity Control
Locate.the.intensity.control.knobs.at.the.top.of.the.unit.under.the.cap..Open.the.cap.first,.slowly.turn.
the.intensity.control.knob.for.Channel.1.clockwise.until.you.reach.the.intensity.recommended.by.your.
medical.professional..Always.start.with.the.lowest.step.and.increase.slowly..Repeat.the.same.process.
for.Channel.2,.if.appropriate..Close.the.cap.after.intensity.setting.ok.
If the stimulation levels are uncomfortable or become uncomfortable, reduce the stimulation amplitude to a
comfortable level. Cease stimulation and contact your physician/practitioner if problems persist.

BATTERY INFORMATION

A.9-volt.disposable.battery.is.provided.with.your.unit..Dimming.of.the.indicator.light.signifies.that.the.
battery.should.be.replaced.with.a.new.one.as.soon.as.possible..However,.the.stimulator.will.continue.
to.operate.for.several.more.hours.
COMTENS III _3 languages.indd 13
13
English
2013/2/23 AM 09:11:11