Hob
– Finding burners and description of control
panel
How to use the burners
Next to each knob there is a symbol that shows
which burner it refers to. Each gas burner knob
has the following symbols:
Stop
Maximum setting
Minimum setting
The burner should be turned on before putting
the pan on the rung.
To turn a burner on, press the knob right down
turning it counter-clockwise to the maximum
position. When the burner is lit, let go of the
knob after 5 seconds. If the burner fails to stay
To fi nd the knob that corresponds to the burner
to use, refer to the silk screen printing on the
control panel.
alight, keep the knob pressed right down longer
to give the safety valve time to warm up.
Check that the fl ame is regular and turn the
knob to the setting required.
If ignition is diffi cult or the fl ame irregular,
check the correct position of the burner and
its cover ( Fig.1 ).
Fig.1
Nozzle holder
NL
FR
ES
EN
Burner cover
Burner
Interchangeable
nozzle
41