Connection And Startup; Ec Housing Design - Eneo VHM-EC/ST Serie Instrucciones De Manejo E Instalación

III Connection and startup
III.1 EC housing design
The EC housing models do not have a central plug con-
nection, i.e. the supply and signal cables are fed through
the housing body. (see fig. 3). Consequently, connections
on the camera can be removed easily without need for
Fig. 3
Wiring EC housing
Fig. 4
P E
9
1 1
Assembling of screw terminal board
We recommend the use of a KV and KVS screw terminal
board for mains distribution and heating connection
(see section VI, Accessories).
1 0
disassembling cables; these can be left at the installa-
tion point with the housing rear section and integrated
cables in the event of temporary removal, or used for
connection of another unit in the event of replacement.
4