Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
Operation of the indoor monitor:
Intercom
When a visitor presses the call button of the outdoor unit, the indoor monitor will give a ding dong sound
and activate the monitor screen. The indoor monitor screen will automatically display a picture of the
visitor. Press the monitor button and speak to the visitor. When you have finished speaking to the visitor,
press the monitor button again to switch off the screen. Or push the unlock button to open the door. The
screen will also switch off automatically when a button is not pushed.
Monitor
Press the monitor button. The screen will automatically display a picture with a view of the outside of
your front door. Press the button again to switch off the monitor or the monitor will switch off
automatically after a while.
Menu
Press the menu button to enter the main menu. Use the UP and DOWN cursor buttons to select a
setting and use the LEFT and RIGHT button to adjust the value of the setting. Press the ESC button to
leave the menu.
Brightness: adjust the brightness of the picture
Contrast: adjust the contrast of the picture
Colour: adjust the colour of the picture
Volume: adjust the volume (also for the ding dong sound)
Specifications:

Outdoor unit:

• Operating voltage:
• Communication system:
• Picture sensor:
• IR LEDs:
• Lens:
• Water/dust protection:
• Operation temperature:
• Weight:
• Dimensions:
By answering unit
Semi duplex
1/4" CMOS colour 640x480
4x IR LED, 1x EDS
F4.5mm (H:40°, V:45°)
IP44
-20°C ~ +50°C
100 g
127 x 47 x 37 mm
5

Publicidad

Tabla de contenido
loading

Tabla de contenido