Please Note; Installation Conditions - Priorit AS32 Serie Manual De Instrucciones

Please Note


Do not remove the protective film and the edge protectors until the set-up location has been
reached!

Be aware that the inside of the cabinet may contain fastening material.

Do not transport the cabinet with the doors open!

Do not transport the cabinet with the keys inserted in the locks!

Danger of tipping over during transport!

Do not remove the transport safety devices in the door joints until the place of installation has been
reached.

Installation Conditions

Inspection upon Delivery
Immediately upon receipt, the delivered goods and the packaging must be checked for damage, missing
parts, and other abnormalities.
Any damage found must be documented at once (drawing, photo, description, etc.) and submitted to
PRIORIT AG.
Unpacking
Do not use sharp-edged tools for unpacking.
The packaging material must be disposed of in an environmentally responsible way.
Installation Conditions
The cabinet must be levelled at its place of installation. After the required adjustments have been made the
cabinet must be perfectly level. The doors must not be off-centre with respect to the body. After levelling the
cabinets, please check that the doors close properly (use the traction of the door closer for self-closing
doors) and snap into the strike plate. The doors should not rub against the fire-proof gaskets when closing
to prevent damaging the gaskets and impairing their fire protection qualities.
The file storage cabinet must be set up in a location where it is not exposed to

direct or indirect heat,

humidity, or

operating temperatures below +5º C or above +40º C.
EP.V.9906-3 20 von 88