How To Disassemble - Tribest Slowstar Serie Manual De Uso

HOW TO DISASSEMBLE

1. Before turning off the Slowstar, remove the fibers in
the Auger Housing by pouring 1 or 2 cups of water
into the Feeding Chute after each use (Self-Cleaning).
2. Turn off the Slowstar first, then unplug the machine.
3. Disassemble the Feeding Chute Assembly first by rotating
counter-clockwise (shown as 3 in the picture).
4. Disassemble the Auger Housing from the Main Body in the
direction of 4a and 4b in the picture.
CAUTION: Only after disassembling the Feeding Chute
Assembly can the Auger Housing be detached from the
Main Body.
5. Disassemble the parts as the reverse sequence
of assembling.
a) Disassemble the Feeding Chute Assembly by
rotating it counter-clockwise.
b) Remove the Duoblade Auger.
c) Disassemble the Juicing Screen.
d) Remove the Pulp Wiping Assembly.
Please be aware that unless the Slowstar is cleaned right after each use, residue may build up. This
may lower the performance of the Slowstar or cause difficulties in cleaning.
14