GE GFE28GELCDS Instrucciones De Instalación página 45

Troubleshooting Tips... Before you call for service
Problem
Water filter indicated as installed
incorrectly or a leak is present on
cap control panel.
is lit
Not filtering
Water filter indicator light is not lit
Refrigerator beeping
Not cooling
Water in glass is warm*
Water dispenser does not work*
*Select Models Only
49-60764
Possible Causes
Water filter installed backward or is
leaking.
Water filter leaking or needs
replacing
Water filter backwards
Control A, B & C
Wrong filter installed
C
Water filter leaking or needs
replacing
This is normal. This indicator will
turn on to tell you that you need to
replace the filter soon.
Handle needs adjusting
This is door alarm
The cooling system is off
Water dispenser has not been used
for a long time
Normal when refrigerator is first
installed
Water dispenser has not been used
for a long time
Water system has drained
Water supply line turned off or not
connected
plug not installed
Air may be trapped in the water
system
the controls are set too cold
What to Do
Replace water filter, check for leak
Replace filter with proper filter
Replace water filter, or install filter
bypass **
See About the Water Filter for more
information.
See Attach Fresh Food Handle and
detailed instructions.
-Turn off or disable with door closed
See About Controls.
system is replenished.
Wait 24 hours for the refrigerator to
completely cool down.
system is replenished
Allow several hours for replenished
supply to chill
See Installing the Water Line
Replace filter cartridge or remove filter
and install bypass plug**
Press the dispenser arm for at least 5
minutes.
Set the refrigerator control to a warmer
does not dispense after 24 hours, call
for service
45