Emergency Operation
When the remote controller is lost or damaged,
please use the manual switch on the main unit.
In that case, the unit will operate in AUTO mode
and the temperature setting or fan speed can not
be changed.
The manual switch can be operated as below:
Turn on the unit: Press AUTO/STOP button to
●
enter AUTO mode.
The microcomputer will select the mode
(COOL, HEAT, FAN) automatically according
to the room temperature for reaching comfortable
effect.
Turn off the unit: Press the AUTO/STOP button to
●
switch off the unit.
The operation mode is seen in the following table.
●
Mode
Model
AUTO
COOLING
AUTO
HEAT
AUTO
HEAT PUMP
This switch is to be applied when the remote controller is missing.
●
Emergency Operation
Temperature setting
25 ( COOL,FAN)
℃
PUMP
25
( COOL,FAN)
℃
20
( HEAT)
℃
Airflow rate
AUTO
AUTO
AUTO
12
Manual switch