Beper RI.064 Manual De Instrucciones página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
EN
If the power cord is damaged, please call your local after sale center
for assistance
This appliance is only intended for domestic use
Once the appliance is installed, make sure to regularly clean it to re-
move any dust and dirt
Only plug the appliance to the wall socket once the installing and
mounting operations have been correctly carried out
Do not use the appliance if the power cord is tangled
Do not turn the appliance off by pulling the power cable; use the on/
off switch
Unplug the appliance from the wall socket when not in use for a long
period of time
Keep the power cable away from hot surfaces
Do not store the appliance in small places until it has cooled down
completely
Do not connect the appliance to external timer devices
Do not install the appliance outdoors
The appliance is fitted with an overheating protection system, that will
automatically shut the appliance off in case it becomes too hot during
operation; if the appliance suddenly shuts off, turn it off and let it cool
down for a few minutes. In case the appliance fails to turn back on,
contact your local after sale center
INSTALLING AND MOUNTING OF APPLIANCE
Warning: before mounting the appliance on the wall, make sure that
the chosen position for installation is free from electrical wires, water
channels or similar.
Make sure that the appliance is firmly fixed on to the wall before let-
ting go.
For installing the appliance, make sure to drill 2 holes at a height of
at least 2 m from the floor.
Leave at least 30 mm of distance from corners and ceiling.
Make sure that the holes drilled are wide enough for the screws to fit
snugly, but also not too wide to avoid them becoming loose.
Fix the screws to the wall anchors on the wall, making sure that the
screw head protrudes from the wall surface for at least 10 mm, to
allow the correct and safe installation of the appliance. (see image
below)
Warning: appliance weight is about 4,5 kg, make sure that the
wall is able to bear this weight ( Fig.A)
16

Publicidad

Tabla de contenido
loading

Tabla de contenido