BATSI MIE210TIC Manual De Uso página 6

RESET VALUES (PARTIAL AND TOTAL)
The partial and total time values, can be deleted if in some moment is needed. To make it ha-
ppen, just go through the menu by pressing the button
"TOT") will be pointed by "<-".
After pushing the button few seconds, the time value will be deleted.
Long press
STOP TIME COUNTING
The MIE210TIC has an option to stop the time counting whenever is needed (only if your MIE-
210TIC is activated via the button and not with the sensor). To do this, just go through the menu
by pressing the button
Once this option is selected, press and hold the button for a few seconds until "REBOOTING..."
appears on the display.
Long press
MODIFY SENSOR TYPE
The MIE210TIC can use a sensor to initialize the timer with the "RPM" selector. This sensor could
be NPN or PNP type.
PNP sensor type
Put the"RPM" selector in P position
5
until reach to the "PRESS TO STOP" option.
so the desired parameter ("PAR" or
NPN sensor type
Put the "RPM" sensor in N position