Care & Maintenance - Roadstar HK-400G Manual De Instrucciones

H. Slots in Base for the Cable
I. Cable Storage
F
Make sure that the mains power cable is not placed where it can be inadvertently pulled or pinched.
CARE & MAINTENANCE
Cleaning
Disconnect from the mains supply before cleaning.
Use a damp cloth to clean the exterior of the kettle.
Never use harsh chemicals or abrasive cleaning agents as these may damage the finish of your
kettle.
Cleaning the Filter
The filter is located inside the kettle behind the spout. Rinse with warm water and gently
remove any scale with a soft brush.
English
I
H
Fig. 1
5 6 English
Descaling
Descale your kettle at least twice a year sing a proprietary descaling solution (follow the
manufacturers instructions carefully).
Alternatively, half fill the kettle with water, add the juice of a lemon or some vinegar, then boil and
allow to stand for 15 minutes. Repeat the process and allow to stand again.
Finally, boil and rinse thoroughly before use.
SPECIFICATIONS
Voltage
Power
Specifications and design are subject to possible modifications without notice due to improvement.
230V ~ 50 Hz
2200 Watt