Metabo HPT ET 36A Manual De Instrucciones página 5

11. ALWAYS disconnect the power cord from its receptacle when the AC/DC adapter is not in
use.
12. ALWAYS use with the applicable cordless tools. (See P. 7 SPECIFICATIONS)
Use with non-applicable cordless tools may cause abnormal heating and
damage cordless tool.
13. ALWAYS use the appropriate cordless tool for the job. Also, make sure to carefully read in
the instruction manual for the cordless tool in use.
14. Do not expose to rain.
15. Do not use the product if the tool or the AC/DC adapter terminals (AC/DC adapter mount)
are deformed.
Installing the AC/DC adapter could cause a short circuit that could result in smoke
emission or ignition.
16. Keep the tool's terminals (AC/DC adapter mount) free of swarf and dust.
○ Prior to use, make sure that swarf and dust have not collected in the area of the terminals.
○ During use, try to avoid swarf or dust on the tool from falling on the AC/DC adapter.
○ When suspending operation or after use, do not leave the tool in an area where it may be
exposed to falling swarf or dust.
Doing so could cause a short circuit that could result in smoke emission or ignition.
17. The product is intended for Use in Pollution Degree 2 or PD2 environments.
Operate only in areas of non-conductive pollution. A temporary conductivity caused by
condensation is normally expected.
18. This is a precision machine so do not drop or expose to impact.
19. Do not use this product near a pacemaker or other similar implanted device, which may be
aff ected by a magnetic fi eld produced by this product.
20. The adapter, power supply box and the inside of the DC cord generates a boosted high
voltage of 380 V so please be careful of the following.
○ Do not disassemble the product.
○ Do not drop or expose to impact.
In the event the product is damaged from strong impact, do not use the product.
○ Do not use the product in areas exposed to rain, snow, iron powder or wet condition.
○ Do not touch the product with wet hands.
○ Do not spill or pour liquid onto the product.
○ Do not pull the cord with excessive force.
○ Use the product in a well-ordered work environment.
CAUTION:
1. When the mesh of the vent is plugged by objects such as wood shavings, try to keep the
objects out when you clear the mesh.
(If not properly maintained, the temperature protective feature could shut the product off )
2. When the temperature protective feature frequently cuts the power off , do not overload
the machine with continued work, but let the machine rest for a little before continuing
operation.
3. The machine does get hot. However, this does not indicate an abnormality.
Keep the electricity running and operate the internal fan to cool the machine before
carrying it elsewhere.
When carrying the product, the case may be hot so please be careful.
4. During use, do not pull the cord to move the Box. Doing so may result in damage.
5. Do not use more that a single cord reel of 30 meters. Doing so may result in damage.
English
5