Metabo HPT ET 36A Manual De Instrucciones página 9

2. Insert the adapter into the tool.
Firmly insert the adapter into the tool as shown in Fig. 2.
3. Adapter removal
Hold the handle tightly and push the battery latch to remove the adapter (see Fig. 2).
Status
Before
use
Power on
Adapter
Power
suspended
Power
Box
suspended
Latch
Pull out
Indications of the indicator lamp
Power
Lamp
(GREEN)
Blinks
Lights
Blinks
Lights for 0.5 seconds. Does
not light for 0.5 seconds. (off
for 0.5 seconds)
Blinks
Lights
Lights for 0.1 seconds. Does
not light for 0.1 seconds. (off
for 0.1 seconds)
Lights for 0.5 seconds. Does
Blinks
not light for 0.5 seconds. (off
for 0.5 seconds)
36V products
compatible with
multi volt battery
ET36A
Push
Insert
Fig. 2
Table 2
Error lamp
(RED)
Light off
Light off
English
Indicates
Plugged into power
source
Tool can be used
Adapter cannot be
used due to high
temperature.
(Can be used once
the adapter is
cooled)
Overload
Cannot be used
because the
temperature in the
box is too high
(Can be used once
the box is cooled)
9