Folding The Rollator; Adjusting The Handle Height - Invacare Delta P429/2 Manual De Instrucciones

Ocultar thumbs Ver también para Delta P429/2:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8

3.3 Folding the Rollator

1. Pull the safety catch upwards - backwards (A).
2. Fold the rollator. NB. Be aware of the risk of crushing between
the parts of the frame.
1)
2)
A)

3.4 Adjusting the handle height

To adjust the height of the handles: Undo the locking levers and adjust
the handles to a suitable height.
Tighten the locking levers, which should then be adjusted so that they
point downwards. (The locking levers can be freely turned by first
pulling them outwards). Check that the handles are set at the same
height. The handles should normally be positioned at wrist height.
WARNING: Risk of falling
The handlebars must point directly backwards when using the
rollator. Under no circumstances should they be angled out-
wards. The vertical line in the knurling must be located in the
middle of the indentation in the frame, (see figure A).
The handles must never be set above their highest position,
indicated by the knurling on the tubes. Handles should be set
to the same height on either side.
A)
23

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Delta p429/2c

Tabla de contenido