INFORMATION
Date of the last update: 2015-06-24
• Please read this document carefully before using the product.
• Follow the safety instructions to avoid injuries and damage to the product.
• Instruct the user in the proper and safe use of the product.
• Please keep this document in a safe place.
INFORMATION
• You can request this document as a PDF file from the Customer Care
Center (CCC) at oa@ottobock.com or from the manufacturer's ser-
vice department (see inside back cover or back page for addresses).
• It is possible to increase the display size of the PDF document.
1 Indications for use
The 434S7 Four-Way Chest Strap Kit is to be used exclusively to support
correction of the sitting posture and positioning of the user in a wheelchair
or seating system.
Attention!
This seat belt does not replace the safety belt when trans-
porting patients in a car.
2 Description and function
The 434S7 Four-Way Chest Strap Kit can be used in combination with
standard wheelchairs and Ottobock seating systems. The back of the wheel-
chair should be high enough so that the assembly points for the shoulder
straps are not too low. This strap kit consists of four straps that are buckle
with a four-way snap buckle to allow quick unbuckling.
The lower two straps fit across the hips and the upper two straps attach
to the seating system behind the shoulders to offer pelvis and upper body
support.
6
English