Beper 70.402 Manual De Instrucciones página 9

Essential Oil Diffuser Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
COMPONENTS Fig.1
1. Mist outlet
2. Cover
3. Lamp switch
4. Mist switch
5. Tank
Use: Fig.2
Place the diffuser on a flat and stable surface.
Remove the diffuser's plastic cover.
Pour water into the water tank up to the maximum level indicated.
Add few drops of essential oil.
Carefully replace the plastic covers on the diffuser's base.
Plug the adaptor into the socket.
Lamp function:
The product can also be used as a lamp.
If you want to turn on the lamp, press the switch once. A fixed white light will light up.
By pressing the same switch a second time the light will be cyclically coloured. You can lock the light on the
desired colour when it is illuminated by simply pressing the switch once again.
By pressing the switch a fourth time the light will turn off.
6. Air outlet
7. Ultrasonic base
8. Product base
9. DC jack
10. Non-slip feet
9
EN