Duplex 280i AC Manual De Instrucciones página 133

Does not start up
DUPLEX 280i AC
Does not start up
DUPLEX 280i DC
Vibrations during the work
stages
Rev.
1.1
Power cord faulty or plug
not correctly inserted into
the socket.
Power cord tripped.
Voltage too low.
Start-up capacitor tripped or
in short circuit.
Battery fuse tripped.
Power cord plug not correctly
inserted into the battery.
Flat battery.
Warped brushes.
133
DUPLEX 280i
MAINTENANCE
Restore and replace, if
necessary.
Replace.
Contact the mains provider.
Replace.
Remove the fuse cap on
the battery and replace
with an identical one of 15
Amp.
Do not use fuses
exceeding 15 Amp to avoid
serious risks.
If the fuse trips again,
search for the fault on the
appliance.
Restore.
Re-charge or replace with a
fully charged spare battery.
Replace.