General Characteristics; Safety At Work; Conditions Of Use; Assembly Instructions - Technoflex PGKV Manual De Instrucciones

Reglas vibro-planeadoras eléctricas y gasolina
Ocultar thumbs Ver también para PGKV:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1B
OPERATION
1.4

General Characteristics

The machine will be used by personnel trained for this job, it will only be used in specific jobs for
which it has been technically developed, after having read the instructions contained in this manual
and which must be fellowed correctly.
The manufacturer or authorised distributor must be consulted about any doubts.
The manufacturer Industrias Technoflex S.A., will not accept any responsibility derived from
incorrect installation, manipulation, or misuse of the Vibro-Surfacing Screed.
Not acting according to the instructions indicated in this manual, will cause the cancellation of the
guarantee.
1.5

Safety at Work

You must wear eye protection when operating the Vibro-Surfacing Screed to prevent injury from
concrete particles, It is also advisable to wear hearing protection against the sound produced by the
motor.
Do not attempt to handle any of the moving parts whilst the motor is running.
The manufacturer will not accept responsibilities, for accidents if they derive
modification of the machine.
In adition to our recommendations the safety regulations of each country in force.
1.6

Conditions of Use

The Vibro-Surfacing Strip model, is designed to give maximum satisfaction to the user, as long as the
instructions of use and maintenance contained in this manual.
This machine is, due to its original design, the ideal machine to attain a high quality finish to concrete
surfaces.
1.7

Assembly Instructions

The Vibro-Surfacing Screed is sent with the Strip mounted and the disassembled arms. To assemble
these please follow the following instructions: (Sees you fig.: 1.7-1 and 1.7-2)
st
1
. - Unseal the arms Pos. 1 that they are sealed above the Vibro-Surfacing Screed.
nd
2
. - To mount them, screwing STRONGLY with a key, the screw and the washers Pos. 2 and 3.
rd
3
. - To mount the central handle Pos.6, using the screws Pos. 5.
th
4
.- For the disassembly, to act in inverse sense.
1B-5
from structure
INGLÉS

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para Technoflex PGKV

Este manual también es adecuado para:

PgkPghPgm

Tabla de contenido