HYDROLAB HL Serie Manual Del Usuario página 18

6.6 Consumables and replacement parts
Consumables
Description
Low Chloride Calibration Standard, 4.62 mg/L
High Chloride Calibration Standard, 46.2 mg/L
Replacement parts
Description
Chloride sensor cartridge, green
Sensor cap
Section 7 Chlorophyll a sensors (007284, 007202, 9060600)
7.1 Specifications
Specifications are subject to change without notice.
Specification
Range
Linearity
MDL ppb
MDL RFU
Parameters
Maximum depth
Operating temperature
7.2 Product overview
Do not put the sensor in red pH 4 buffer. Red pH 4 buffer can cause permanent damage to the sensor lenses. As
an alternative, use pH 4 buffer with no color.
The Chlorophyll a sensor is an optical fluorometer that determines the concentration of chlorophyll a
in water. Refer to Figure
This sensor is sensitive to light. For the best results, point the end of the sensor away from light
sources.
Figure 8 Chlorophyll a sensor
5
ppb is equivalent to µg/L. RFU is 0–100 based on the full detection range of the sensor.
18 English
Details
0 to 500 µg/L
2
R = 0.998
0.05
0.0003
µg/L, ppb, volts, RFU
200 m (656 ft)
–5 to 50 °C (23 to 122 °F), non-freezing
N O T I C E
8.
Quantity
500 mL
500 mL
5
Item no.
013820HY
013830HY
Item no.
003951
003960