Device Maintenance - Leotec Swim Swolf Guía Rápida De Inicio

4.More Information
Waterproo ng instructions
4.1
The waterproof level of Swim Swolf is IP68.
Note:
1.Swim, shower and wash hands only under cold water.
2.Total Heart II does not have waterproof e ect on seawater, acid and alkaline solution,
chemical reagent and other corrosive liquids. If inadvertently encounter corrosive liquid, please
clean with clear water and dry it. The damage caused by abuse or improper use is not within
the scope of warranty.
4.2 Speci cation parameter
Product model Swim Swolf
Adjustable
155mm-211mm
range of strap
Bluetooth Bluetooth 4.2
Screen
240*240
resolution
about 5-7 days (Run once a week for an hour; 200 noti cations per
Battery life
week; 25% Screen brightness )8 hours (GPS mode keeps on)
Size 49×37×13.7mm
Weight About 40g
Working
0-40℃
condition

5.Device Maintenance

Device care
Notice:
1.Do not use a sharp object to clean the device.
2.Avoid using solvents, chemical cleaners or insect repellents that might damage plastic
components of the device.
3.Thoroughly rinse the device with fresh water after exposure to chlorine, salt water, sunscreen,
cosmetics, alcohol or other harsh chemicals. Prolonged exposure to these substances can
damage the device.
4.Avoid extreme shock and harsh treatment since it can reduce the product life.
5.Do not exposure to extreme temperatures that are too cold or too hot for a long time, which
can cause permanent damage.
6.After each training, please rinse the watch with clean water.
Cleaning the Device
Note:
Even the fainter sweat or moisture may cause the corrosion of the charging terminal when
charging the device, which will also hinder the transmission of data and a ect the charging.
1.Gently wipe the device by using a annelette with a neutral mild detergent;
2.Wait for dry.
Please allow the device to dry completely after cleaning.