Box Content - Greencut TOOLS819 Manual De Instrucciones

20

BOX CONTENT

-
1 6" point pliers
-
1 6" Combination Pliers
-
1 6" Cutting Pliers
-
1 9" Parrot Beak Pliers
-
1 Wrench 6" Wrench
-
9 Mixed / star-flat keys :
6, 8, 10, 11, 12, 13, 14, 15, 17mm.
-
1 Wire stripper
-
1 Hot silicone gun
-
2 Silicone rods
-
1 Insulating tape
-
1 x 8" Scissors
-
1 Cutter
-
10 Cutter blades for cutter
-
1 12Oz Hammer
-
1 Level
-
2 Pressure clamps
-
238 Hardware accessories in plastic box
-
12 Bits for ratchet screwdriver
-
1 5M tape measure
-
11 Screwdrivers
-
3 Electrically insulated screwdrivers
-
1 Ratchet Screwdriver
-
1 Screwdriver for pole-screwdriver: 100V-500V
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, contact the Official Technical Service. Do not use
this product without having replaced the missing or damaged part. Using this product with
damaged or missing parts can cause serious injury to the operator.
-
1 Tyre pressure tester
-
48 Bits for ratchet screwdriver
-
1 58mm Ratchet Screwdriver Bit Holder
-
16 Allen keys
-
6 Precision Screwdriver Boxes
-
14 Glasses from ½":
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 30mm.
-
15 Glasses ¼":
4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 9, 10, 11, 12, 13, 14mm.
-
1 Flexible extension cord
-
2 Sliding handle ¼ and ½
-
2 Swivel adapters ¼ and ½
-
2 2" and 4" extensions for tool from ¼
-
1 5" extension cord for ½" tool
-
2 Glasses for 16mm and 21mm spark plugs
-
1 Adapter with screwdriver handle for sockets from ¼
-
2 Ratchet wrenches from ¼ and ½
-
2 White gloves
-
200 Plastic flanges
-
50 M3X20 screws
-
50 M3X10 screws
-
50 Flat washers
-
50 Nuts
-
1 Aluminium case